EasyManua.ls Logo

Bosch Indego M+ 700 - Page 29

Bosch Indego M+ 700
448 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English | 29
Main Menu Sub-menu 1 Sub-menu 2 Explanation
You can set up your SmartMowing schedule by using the free
Bosch Smart Gardening App.
Schedule Edit (selected day) Program a mowing schedule by setting individual mowing days
and slots (up to 2 per day).
Don't mow/Delete
slot
This will delete the corresponding slot for the selected day.
The number of full cuts per week for the actual schedule are shown
at the bottom of the display.
Off/Manual Choose this option when no schedule should be used. The mower
starts mowing only by activating “Mow now”.
With Indego M+ 700 you can start mowing, by pressing the
“mow” button on the free Bosch Smart Gardening App.
Settings
Mowing mode
SpotMow Select between a size of 2 m x 2 m, 3 m x 3 m and 4m x 4m.
Mow without dock-
ing station
Mower will mow in the additional lawn area without docking sta-
tion in random mode until it runs out of battery.
Border cut Select between the mower cutting the border once every full cut
(default setting), once every two full cuts, or not performing a bor-
der cut (off).
Security
Auto Lock If buttons are not pressed for 3min. they will be automatically
locked.
Recommended for safety reasons and protection against theft.
On PIN code is required for reactivation after Auto Lock.
Off The buttons are always ready for input.
Change PIN Changing of a PIN code requires entering of existing PIN code first.
Alarm
On Alarm is activated.
Off Alarm is deactivated.
Date & Time
Change the date and time.
Set Language
Change the display language.
Info
System status Information on battery charge, system information and operating
and charging time for the mower.
Advanced
Wire ID Change the perimeter wire ID when possible interferences are
nearby.
Sensor setting/
Lawn condition
Select between Low (uneven ground), Normal and High (slippery
ground). Mower bump sensor will become more or less sensitive
depending on lawn condition selected.
Remap Deletes the current map of the garden.
Factory Reset Reset the mower to factory settings will delete all personal set-
tings (not PIN).
After a factory reset, the mower will need to remap the garden/s.
Bosch Power Tools F 016 L81 041 | (15.04.2020)

Table of Contents

Related product manuals