Bosch Indego M+ 700 - Installation and Setup; Initial Installation Procedures

English | 25
Robotic Lawnmower SI
Unit
Indego M 700 Indego M+ 700
Docking station
Article number F 016 L68 963 F 016 L68 963
Input voltage VDC 24 24
Power consumption charging/ perimeter
wire switched on
W 73/2.6 73/2.6
Charging current (up to) A 2.3 2.3
Allowable charging temperature range
B)
°C 5-45 5-45
Weight according to EPTA‑Procedure
01:2014
kg 1.65 1.65
Protection type IPX4 IPX4
Power supply unit
Article number
Switzerland F 016 L90 934 F 016 L90 934
United Kingdom F 016 L90 935 F 016 L90 935
Rest of Europe F 016 L90 916 F 016 L90 916
Input voltage (AC) V 220-240 220-240
Protection class
/ II / II
Frequency Hz 50–60 50–60
Output voltage (DC) V 24 24
Protection type IPX7 IPX7
Weight kg 1.25 1.25
A) Depends on cutting height, grass conditions and moisture
B) Internal battery temperature
Noise/Vibration Information
Noise emission values determined according to
EN50636-2-107.
Typically the A-weighted noise levels of the product are:
Sound power level 61dB(A). Uncertainty K=2dB.
Explanation of Figures
Action Figure Page
Accessories
A
430
Delivery scope/unpacking the mower
B
431
Laying out perimeter wire
C
431
Extending perimeter wire
D
432
Laying perimeter wire around new in-
ner object
E
432
Lifting up and carrying the mower
F
433
Setting the height of cut
G
433
SpotMow
H
434
Cleaning
I
435
Maintenance
J
435
Adding a further lawn area
K
434
Action Figure Page
– with additional docking station
(right)
– without additional docking station
(top left)
Replacing the battery
L
436
Software update
M
437−438
Power supply unit connection
N
439
Installation
For a video guide on how to install the mower, please visit
www.bosch-indego.com or use the following QR-Code. Al-
ternatively, follow the Installation Guide delivered with the
product.
Check if the perimeter wire is fully pegged to
the ground avoiding any slack lengths of wire.
Any loose wire can be a trip hazard.
Bosch Power Tools F 016 L81 041 | (15.04.2020)