Bosch NDC-255-P - Mounting and Camera Positioning

IP Camera 200 Series Installation | en 21
Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
3.7 Mounting
Figure 3.6 Mounting the camera
To mount the camera to a wall or ceiling:
1. Stick the supplied installation paper sticker to the surface
taking care to orientate it correctly.
2. Drill two holes with a diameter of 6 mm.
3. Insert the supplied plugs into the holes.
4. Attach the camera and base unit securly to the surface
using the two supplied M4 screws.
M4 (Ø3.3 mm)
Ø6 mm
x2
x2
CAUTION!
Do not point the camera/lens into direct sunlight as this may
damage the sensors.