IP Camera 200 Series Technical Data | en 95
Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
10 Technical Data
10.1 Specifications
Input voltage +12 VDC or Power-over-Ethernet
Power consumption 4.08 W (max)
Sensor type ¼-inch CMOS
Sensor pixels 640 x 480
Sensitivity 1.0 lux
Video resolution VGA, QVGA
Video compression H.264 MP (Main Profile); H.264 BP+ (Baseline
Profile Plus); M-JPEG
Frame rate 30/25 fps: all resolutions, triple stream
Lens type Varifocal 2.8 to 10 mm, F1.2 to close (NDC-255-P)
Fixed 4 mm, F1.5 (NDC-225-P)
Alarm Input Short or 5 VDC activation
Relay Out Switch rating: Max. 1 A 24 VAC/VDC
Audio Input Built-in microphone, Line in jack connector
Audio Output Line out jack connector
Audio
communication
Two-way, full duplex
Audio compression G.711
Memory card slot Supports up to 32 GB microSD/SDHC card
Recording Continuous recording, ring recording. alarm/
events/schedule recording
To Next Page
Loading...
