Bosch OBD1300 - Page 15

Quick Start Guide | 15English
575610 Rev B | 03.2016
Bosch Automotive Service Solutions Inc.
Function Menu Description
Read Codes Diagnostic Codes Reads DTCs from vehicle’s com-
puter with KOEO or KOER.
Read KOEO
Fast Codes/
Read KOEO
Slow Codes
Diagnostic Codes This function executes the Ford
Key On Engine Off Self Test. It
tests the inputs, outputs, and
sensor ranges while the engine is
off. Any faults will be displayed as
DTCs. This function only applies to
Ford OBD I vehicles.
Read KOER
Fast Codes/
Read KOER
Slow Codes
Diagnostic Codes This function executes the Ford
Key On Engine Running Self Test. It
tests the inputs, outputs, and
sensor ranges while the engine is
off. Any faults will be displayed as
DTCs. This function only applies to
Ford OBD I vehicles.
Record Data Datastream Records vehicle PIDs while vehicle
is parked or being driven. This
function is for diagnosing intermit-
tent driveability problems.
Review Data Main, Diagnostic,
Datastream, Diag-
nostic Codes,
Special Tests, On
Demand Tests
Allows review of data stored in
Scan Tool.
Special Tests Diagnostic Menu selection that provides
functions of a special nature that
will vary by vehicle.
STAR Test
Mode
On Demand Tests This function is used to manual
execute Ford OBD I self-tests.