PAVIRO Amplifier Connection | en 19
Bosch Security Systems, B.V.
User manual
2023-03 | 08 | F01U306898
minimize these reflections, these stub lines must not exceed a maximum individual length of
2m at data transmission rates of up to 125kbit/s, or a maximum length of 0.3m at higher bit
rates. The overall length of all branch lines must not exceed 30m.
The following applies:
– In terms of rack wiring, standard RJ-45 patch cables with 100-ohm impedance (AWG24/
AWG26) can be used for short distances (up to 10m).
– The guidelines specified above for the network cabling must be used when wiring the
racks with each other and for the building installation.
Refer to
– Configuring the CAN baud rate, page 21