Need help?Do you have a question about the Bosch PAVIRO PVA-2P500 and is the answer not in the manual?
General| Amplifier class | D |
|---|---|
| Frequency range | 50 - 25000 Hz |
| Audio output channels | - channels |
| Peak power per channel | 500 W |
| Signal-to-Noise Ratio (SNR) | 104 dB |
| Total Harmonic Distortion (THD) | 1 % |
| Purpose | - |
| Grounding | Yes |
| Cooling type | Passive |
| Product color | Black |
| Connectivity technology | Wireless |
| Maximum current | 2 A |
| AC input voltage | 115 - 240 V |
| DC input voltage | 21 - 32 V |
| Power protection features | Short circuit, Under voltage |
| Power consumption (standby) | 3 W |
| Ethernet LAN (RJ-45) ports | 2 |
| Speakers connectivity type | RJ-45 |
| Operating temperature (T-T) | -5 - 45 °C |
| Package weight | 19000 g |
Weight and Dimensions| Depth | 88.2 mm |
|---|---|
| Width | 483 mm |
| Height | 391 mm |
| Weight | 16500 g |
Covers general safety symbols, warnings, and essential operating instructions for safe use of the amplifier.
Addresses electrical safety risks including overloading, proper power source selection, and precautions for power line installation.
Provides a summary of the PVA-2P500 amplifier, its capabilities, and key operational features for evacuation purposes.
Provides guidance on installing the device horizontally in a 19" rack cabinet, considering environmental protection and mounting methods.
Details the RJ-45 LINE 1-4 IN/THRU audio input sockets, their pin assignment, and connection recommendations.
Details the galvanically insulated audio outputs for 70V/100V speaker lines, including connector types, cable specifications, and safety warnings.
Explains how to set the device's CAN address using HIGH and LOW selector switches for network identification.
Provides instructions for manually resetting the device to its factory default settings, including necessary precautions.
To Next Page
