System overview
Front panel
Number Symbol Element Description
1 Signal clip
indicator light
Indicates the signal level of the amplifier channel:
– Green = The output signal is 18 dB below clip
level
– Yellow = The output signal is clipping or the
integrated limiter of the amplifier is limiting the
output signal.
2 General fault
warning indicator
light
This indicator lights up yellow when a fault has
occurred in the device. The types of faults to be
displayed via this indicator are configured in IRIS-
Net. Please refer to section Operation, page 25.
3
3.1
PAVIRO Amplifier System overview | en 9
Operation manual 18-Jun-2015 | 04 | F01U306898