Bosch PAVIRO PVA-2P500 - Short Information; Product Overview and Key Features

8 en | System overview PAVIRO Amplifier
2023-03 | 08 | F01U306898
User manual
Bosch Security Systems, B.V.
Number Symbol Element Description
– Resetting a ground fault or watchdog fault:
Press the button briefly to confirm a watchdog
fault or ground fault (stand-alone mode only,
please refer to section Stand-alone mode, page
22 )
– Setting/displaying the CAN baud rate: Press this
button for at least one second. Please refer to
section Configuring the CAN baud rate, page
21 .
– Resetting to delivery condition: To reset all
settings to their original configuration on
delivery, press this button for at least three
seconds to reset all device settings.
4 Ground fault
indicator light
This indicator lights up yellow when a ground fault
has occurred at least one output. The indicator
remains illuminated even when the ground fault has
been resolved. To deactivate the indicator, press the
Recessed button (3) or use IRIS-Net. Please refer to
section Stand-alone mode, page 22 .
5 Audio signal
indicator light
This indicator lights up green if an audio signal
(signal level > -36dB) is present at the power
amplifier input.
6 Network indicator
light
This indicator lights up green in the event of
successful data communication with the controller.
7 Standby indicator
light
This indicator lights up green when the device is in
standby mode.
8 Power indicator
light
This indicator lights up green when the power
supply is OK.