Need help?Do you have a question about the Bosch PAVIRO PVA-4CR12 and is the answer not in the manual?
General| Model | PAVIRO PVA-4CR12 |
|---|---|
| Type | Controller |
| Number of Amplifier Channels | 4 |
| Mains Voltage | 100 - 240 VAC, 50/60 Hz |
| Pilot Tone Monitoring | Yes |
| Short Circuit Protection | Yes |
| Protection Class | IP30 |
| Relay Contact Rating | 24 VDC, 1 A |
| Audio Inputs | 4 x balanced line inputs |
| Audio Outputs | 4 x speaker outputs |
| Operating Temperature | -5 ºC to +45 ºC |
| Storage Temperature | -20 °C to +70 °C |
| Dimensions (W x H x D) | 483 mm |
| Communication Interface | Ethernet |
Essential safety instructions for installation and operation.
Guidelines for device disposal and FCC regulatory compliance.
Brief summary of the PAVIRO Controller's capabilities and features.
Explanation of the PAVIRO system's features, audio routing, and components.
Details on call stations, control I/O, automatic control, and system interfaces.
Description of rear panel connections and front panel controls, indicators, and monitoring.
List of items included in the delivery package with the controller.
Guidelines for mounting, ventilation, and installing optional modules.
Connecting microphones, line-level audio, and speaker outputs to the controller.
Connecting amplifiers, Ethernet, CAN BUS, and CST BUS interfaces.
Connecting and configuring various control input and output signals for system control.
Using IRIS-Net software for network setup and baud rate display.
Monitoring loudspeaker lines, measuring impedance, and detecting faults.
Using pilot tone and monitoring amplifier inputs for system status.
Procedures for updating controller firmware and battery replacement warnings.
Detailed electrical, environmental, mechanical specifications, and dimensions of the controller.
To Next Page