PAVIRO Controller System overview | en 11
Bosch Security Systems
User manual
2022-11 | 07 | F01U306900
3.2 Front
Number Symbol Element Description
1 Zone status indicator light Indicates the status of the zone:
– Green = Zone is in use for non-
emergency purpose
– Yellow = Zone fault detected (Note:
The indication of this status has the
highest priority)
– Red = Zone is in use for emergency
purpose
– Off = Zone in idle condition
2 Combined fault warning
indicator light
This indicator lights yellow if a fault in
the system is detected. The indicator is
coupled with the READY contact (see
section
Ready relay, page 27
) on the
rear of the device, which allows any
faulty system behavior to be reported
externally.
Note: The fault types to be indicated via
this indicator can be configured.
3 Recessed button The button is protected to prevent it
from being pressed accidentally. Use a
pointed object (such as a ballpoint pen)
to press the button.
This button has the following functions:
– Silencing of the buzzer: If the
buzzer is active, press the button
briefly to deactivate the warning
tone.
– Find function: If the find function of
the device is activated, press this
button to deactivate the indicators.
– Displaying the CAN baud rate: Press
this button for at least one second.
Please refer to section
Displaying
the CAN baud rate, page 34
To Next Page
Loading...
