Bosch Rexroth VT-VPCD-1-1X/V0/1-P-1 User Manual

Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699959
enquiries@hyquip.co.uk
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
www.hyquip.co.uk/web/index
Operating instructions
RE 30028-B/
09.13
Replaces: 10.12
English
VT-VPCD
Digital closed-loop control electronics for axial piston pumps
A4VS... with HS4 control and A2V... with EO4 control

Bosch Rexroth VT-VPCD-1-1X/V0/1-P-1 Specifications

General

Manufacturer	Bosch Rexroth
Model	VT-VPCD-1-1X/V0/1-P-1
Category	Controller
Supply voltage	24 V DC
Ramp time	Adjustable
Housing Material	Aluminum
Protection Class	IP20
Command value	0 to 10 V

Summary

2 Safety instructions

2.2 Intended use

Defines the product's intended application and use.

2.3 Improper use

Outlines improper uses and associated liabilities.

2.4 Personnel qualifications

Specifies required knowledge for safe operation.

2.5 General safety instructions

Provides overarching safety rules for product use.

2.6 Product-specific safety instructions

Details safety precautions specific to the VT-VPCD.

3 General notes on damage to material and the product

5 About this product

5.2.3 Display and operating elements and test sockets

Describes the front panel controls, display, and test connections.

5.2.4 Pinout of the edge connector

7 Installation

7.3 Installation conditions

7.5 Installing the VT-VPCD

Step-by-step guide for physically installing the VT-VPCD.

7.5.1 Installing the local bus

7.5.2 Connecting solenoids and sensorics

8 Commissioning

8.1 Initial commissioning

Basic steps for bringing the control electronics online.

8.1.1 Establishing operational readiness

8.1.2 Installing software BODAC

9 Operation

9.1 Indicator/operating elements and ports of the control electronics

9.1.1 Menu tree for setup and parameters

9.2 Operating the control electronics VT-VPCD

9.3 Performing diagnostics

Methods for diagnosing issues with the control electronics.

10 Maintenance and repair

11 Removal and replacement

14 Troubleshooting

14.1 How to proceed for troubleshooting

General approach to diagnosing and resolving faults.

14.2 Error messages

Lists and explains common error messages.

14.3 Changing the fuse

Procedure for replacing a blown fuse.

15 Technical data