Bosch Rexroth VT-HNC100 3X/S Series - User Manual

RE 30159, edition: 2012-03, Bosch Rexroth AG
Digital drive controller
for hydraulic axes
withsercos interface
Contents
Features 2
Ordering code 3
Software project planning 4
Overview of the controller functions 4
System overview 5
System overview, interfaces 6
Technical data 7
Pin assignment 12
Unit dimensions 13
Project planning / maintenance instructions /
additional information 14
 Component series 3X
RE 30159
Edition: 2012-03
Replaces: 09.11
H7644
Type VT-HNC100.../S

Bosch Rexroth VT-HNC100 3X/S Series Specifications

General

Series	VT-HNC100 3X/S
Category	Controller
Type	Hydraulic Axis Controller
Manufacturer	Bosch Rexroth
Input Voltage	24 V DC
Protection Class	IP20
Operating Temperature	0 to 50 °C
Storage Temperature	-25 to 70 °C
Relative Humidity	Max 95% non-condensing
Communication Interfaces	RS232
Programming Language	IEC 61131-3
Certifications	CE, UL