How to prevent damage when connecting or disconnecting plug-ins on Bosch Controller?
To avoid damage to the SB356 system box or tightening system of your Bosch Controller, first switch off the system at the power switch and then at the mains or pre-fuse. Allow a minimum discharging time of 10 seconds before disconnecting or connecting any plug-in connections.
General| Brand | Bosch |
|---|---|
| Model | REXROTH SB356 |
| Category | Controller |
| Language | English |
States that assembly, commissioning, and operation require qualified technical personnel.
Details signal words (CAUTION, WARNING, NOTE), warning triangles, risk types, consequences, and precautions for understanding safety instructions.
Lists required tools and outlines safety precautions for assembling the SB356 system box.
Details how to insert individual modules into the SB356 and close unoccupied slots.
Details requirements for protective grounding (PE wire) and potential equalization.
Provides crucial warnings about using correct terminals for mains connection and not mixing groups.
Explains compatibility of stationary spindles and ErgoSpin nutrunners and the peak current limit.
Warns about risks to persons and property, and overheating during commissioning.
Outlines steps for commissioning, including connecting PE wire, opening the box, and setting voltage/switch.
Warns against dirt/liquids penetrating the device and ensures doors are closed during operation.
Provides warnings about dangerous internal voltage and discharging time.
Lists steps for disassembling the SB356 system box, including power-off and discharging.
Presents detailed specifications for the SB356 system box, including voltage, power, dimensions, and weight.
To Next Page