Need help?Do you have a question about the Bosch Rexroth EcoDrive 03 and is the answer not in the manual?
General| Protection Class | IP20 |
|---|---|
| Control Method | CANopen |
| Communication Interface | CANopen |
| Operating Temperature | 0°C to +45°C |
| Number of Axes | 1 |
| PLC Functionality | No |
| Relative Humidity | 5% to 95% (non-condensing) |
Essential safety guidelines for installation, operation, and maintenance of the drive controller.
Hazards related to unintended motion and safety precautions for preventing accidents.
Warnings and precautions regarding electrical hazards during operation and maintenance.
Health hazards for individuals with implants and precautions for electromagnetic field exposure.
Warnings about hot surfaces on components and burn prevention measures.
Defines the intended applications and operating conditions for the product.
Explanation of the product's type code structure and its meaning.
Details about identifying the device using its specific type plates.
Lists the components and accessories included in the product's scope of supply.
Key electrical specifications, dimensions, and physical data for the drive controller.
Required clearances for installation and ventilation for proper operation.
Lists and categorizes supplementary documentation for the product.
Guidelines for providing external branch circuit protection according to standards.
Specifics on connecting the 24V control voltage supply via connector X1.
Details for connecting motors and mains power supply via connector X5.
Information on connecting motor temperature sensors and holding brakes via connector X6.
Description and connection details for the EcoX expansion interface.
Essential safety information and requirements for protective conductor connections.
Guidelines for connecting cable shields to reduce electromagnetic interference.
How to use the diagnostic display and set the drive address using switches.
Procedures and crucial considerations for installing the drive controller.
Guidelines for control cabinet design, airflow, and environmental conditions.
Proper positioning of cooling units to prevent damage from condensation.
Strategies to prevent moisture condensation inside control cabinets.
To Next Page