Bosch Rexroth EcoDrive 03 - X10 EcoX Expansion Interface

5-12 Instructions for Use Rexroth EcoDrive 03 DKC**.3-016
DOK-ECODR3-DKC16*UL***-IB01-EN-P
Basic connection of motor power, holding brake and
motor temperature monitoring
AP5387F1.FH7
AC-Motor
M
3
U1 V1 W1
X1 X2
T1 T2
U
BR-
BR+
3 4 1 2
A1 A2 A3
X6
5 6
TM+ TM- BR+ BR-
U
B
0VB
24V Ext
0V Ext
DKC
XE1
X5_M
24V
XS1
Temperature
dependent resistance
Holding
brake
Fig. 5-25: Connection of motor cable, holding brake and temperature monitor
for motors with connector box
Note: The cable designations and all details on making cables are
outlined in the cable or motor document.
X10, EcoX Expansion interface
Note: EcoX allows:
• synchronizing drives and I/O modules
• connecting up to 2 modules with 16 digital inputs and
outputs each per drive controller
• transmitting a command value from one drive controller to
a maximum of three other drive controllers
Technical description of connector
Ap5268f1.FH7
123 456
Fig. 5-26: Connector X10
Type No. of pins Design
Spring contact 2 x 3 Bushing on connector
Fig. 5-27: Design
Cross section
single wire
[mm²]
Cross section
multi core wire
[mm²]
Wire size
in AWG
gauge no.:
0.2-2.5 0.2-1.5 24-16
Fig. 5-28: Connection cross section
Illustration:
Design:
Connection cross section: