Do you have a question about the Bosch Rexroth IndraControl VPB 40.3 and is the answer not in the manual?
Brand | Bosch |
---|---|
Model | Rexroth IndraControl VPB 40.3 |
Category | Controller |
Language | English |
Explains the manual's objective, applicability, and target audience.
Describes the type plate and its key information.
Lists the items included in the product package.
Explains the structure of safety instructions, signal words, and symbols.
Defines the product's intended applications and functionalities.
Explains the meaning of icons used in the manual and on the device.
Details Y-repeater and external 24V power supply unit.
Lists UPS, CDI interface cables, and USB cables.
Discusses components like CMOS battery, hard disks, and fans with limited service life.
Specifies temperature, humidity, air pressure, and mechanical strength limits.
Warns about gases, contaminated air, and electrical interference classes.
Details processor, chipset, RAM, hard disk, and interface options.
Covers protection degree, voltage, power consumption, and weight.
Lists compliance standards like IEC 60204-1 and others.
Explains CE marking, EU directives, and declaration of conformity.
Details UL and CSA certifications and compliance requirements.
Covers general interface rules and lists all connection types.
Explains the 24V DC power connection, pinout, and safety notes.
Details the six USB ports, their power limits, and monitoring.
Covers Ethernet (XETH) and DVI (XDVI) connections.
Explains CDI interfaces for data and image transfer to operator displays.
Describes available PCI/PCIe slots and their power consumption.
Provides guidance on cable routing and required space for maintenance.
Emphasizes electrostatic discharge protection during extension card installation.
Details removing the housing cover for PCs with one or two slots.
Details removing the housing cover for PCs with four slots.
Covers card insertion, Plug-and-Play, and BIOS configuration for interrupts.
Shows physical dimensions for vertical mounting of devices with one slot.
Shows physical dimensions for vertical mounting of devices with two slots.
Shows physical dimensions for vertical mounting of devices with two slots and DVD drive.
Shows physical dimensions for horizontal mounting of devices with two slots.
Shows physical dimensions for vertical mounting of devices with four slots and DVD drive.
Shows physical dimensions for horizontal mounting of devices with four slots and DVD drive.
Displays side view dimensions for devices with one or two slots.
Displays side view dimensions for devices with four slots.
General information on connecting power sources and UPS.
Illustrates the connection diagram for a UPS unit.
Shows connection schemes for UPS with USB communication interface.
Provides guidelines for routing CDI cables in interference-prone environments.
Details shielding, potential equalization, and connector care for CDI cables.
Explains how to prepare CDI cables, including removing jackets and foil shields.
Shows how to attach shielding clamps to CDI cables.
Lists key software functions described in the project planning manual.
Provides a labeled diagram of the front view of the control cabinet PC.
Explains the function of LEDs for device status and errors.
Details LED meanings and corresponding actions for operational status.
Lists common errors and their solutions, like display issues and unexpected shutdowns.
Addresses problems like no image output and incorrect network data transmission.
Outlines permitted maintenance, cleaning, and terminal tightening procedures.
Covers maintenance tasks, IP checks, and hard disk replacement.
Details hard disk exchange steps and identifies the fan location.
Provides step-by-step instructions for replacing the fan.
Explains CMOS battery function, life, and replacement process with safety warnings.
Directs users to Chapter 5 for ordering information.
Explains the structure of the product's type code for configuration details.
Outlines procedures for product returns and packaging recycling.
Explains battery disposal regulations and symbols within the EU.
Provides contact details and information required for service requests.