Need help?Do you have a question about the Bosch Rexroth IndraControl L25 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | Rexroth IndraControl L25 |
| Category | Controller |
| Language | English |
Explains documentation scope, target groups, and product phases.
Details about the product type plate and its markings.
Lists the items included in the product delivery package.
Explains safety instruction structure, including symbols and signal words.
Defines DANGER, WARNING, CAUTION, and NOTICE signal words.
Details connector sets for L45, L65, L85 models.
Details connector sets for the L25 model.
Information about the fan for L45, L65, L85 controls.
Details the 3V lithium battery for L45, L65, L85.
Information on the display exchange set for controls.
Details the cap for the Compact Flash slot.
Information about the 24V power supply unit.
Lists wear parts like display, battery, and fan with their service life.
Lists processors for L25, L45, L65, and L85 controls.
Details RAM specifications for L45, L65, L85 and L25.
Information on interfaces to function modules and I/O terminals.
Provides details on operating voltage, current, and power consumption.
Lists standards the product complies with.
Information regarding CE marking and declaration of conformity.
Details UL/CSA certification and compliance.
Provides a visual overview of the control's interfaces.
Detailed overview of various interfaces on the control.
Provides guidelines for installing the control and ensuring sufficient cooling.
Shows dimensional drawings for L45, L65 (without fan) in various views.
Provides steps and warnings for mounting the control onto a top-hat rail.
Instructions for mounting the EMI shielding for ESD protection.
Steps for placing and sliding function modules onto the top-hat rail.
Instructions for attaching end clamps as lateral termination elements.
Steps for putting and latching the fan onto the control.
Steps for separating function modules and removing the control from the top-hat rail.
Procedures for removing and changing Rexroth Inline terminals.
General safety and installation guidelines for electrical connections.
General warnings and precautions for electrical installation.
Specifies the Bosch Rexroth power supply unit for logic supply.
Explains how the control is powered via the black power connector.
Explains 24V voltage supply setup with or without electrical isolation.
Discusses optimal grounding for noise immunity and interference discharge.
Provides information on shielding to reduce interference effects.
Instructions for connecting lines to tension spring connection points.
Advises on using the control above 2700m and recommended measures.
Illustrates digital inputs at the connector set for L45, L65, L85.
Shows digital outputs on slots 3 and 4 for L45, L65, L85.
Refers to project planning manuals for details on other interfaces.
Warns against removing the Compact Flash card during operation.
Outlines the steps to commission the control.
Provides a general overview of the control's front view components.
Describes the single-line display and its four operating keys.
States that maintenance is only permissible by skilled staff.
Lists measures for annual maintenance checks.
Information on display fading and exchange procedure.
Details the lithium battery for SRAM memory and its replacement.
Refers to chapter 5 for accessory and spare parts information.
Explains the type designation code for the L25 control.
Explains the type designation code for the L45 control.
Explains the type designation code for the L65 control.
Explains the type designation code for the L85 control.
Instructs to dispose of products according to national standards.
Provides information on returning products for disposal.
Describes packaging materials and their recyclability.
Explains battery disposal and recycling obligations.
Contact information for the Competence Center in Lohr, Germany.
Information on contacting local service offices outside Germany.
Lists information to have ready for faster service.
To Next Page