4 Intended Use
Danger of destruction of the device if not ex‐
pressly stated accessories, mounting parts
and other components, cables, lines, soft‐
ware and firmware are used.
The control may only be used with the accessories and mounting parts listed
in this documentation. Components that are not expressly mentioned must
neither be attached nor connected. The same is valid for cables and lines.
Operation must only be carried out with the hardware component configura‐
tions and combinations that are expressly specified and with the software and
firmware indicated and specified in the respective documentation and func‐
tional descriptions.
Typical fields of use of the controls are:
● Handling systems and assembly systems
● Packaging and food processing machines
● Printing machines and paper converting machines
● Machine tools
● Woodworking machines
The controls may only be operated under the mounting and installation condi‐
tions, the position, and the ambient conditions (temperature, degree of pro‐
tection, humidity, EMC etc.) specified in this documentation.
DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
Bosch Rexroth AG 11/65
Intended Use
To Next Page
Loading...
