Need help?Do you have a question about the Bosch Rexroth IndraDrive HCS01 Series and is the answer not in the manual?
General| Manufacturer | Bosch Rexroth |
|---|---|
| Category | Controller |
| Protection Class | IP20 |
| Communication Interfaces | EtherCAT, PROFIBUS, PROFINET, CANopen |
| Safety | STO (Safe Torque Off) |
| Ambient Temperature | 0°C to +45°C |
| Relative Humidity | 5% to 95% (non-condensing) |
General safety instructions and warnings for operating Rexroth IndraDrive components.
Provides general safety information, prerequisites, and notes for working with the drive controller.
Details risks and precautions for preventing electric shock from live parts and housings.
Addresses risks associated with unexpected machine movements and their potential causes.
Explains how to protect the drive controller components against overcurrent.
Details the various connection points on the drive controller for wiring and communication.
Explains the importance and procedure for connecting the equipment grounding conductor for safety.
Details the connection procedure for the main power supply to the X3 terminal.
Describes how to connect the motor to the drive controller via the X5 terminal.
Covers connections for motor temperature monitoring and control of the motor holding brake.
Describes the connection of DC bus for multiple devices or capacitor units via X77.
Offers general guidance and precautions for the installation of the drive controller.
Outlines fundamental rules for designing and installing drives in compliance with EMC standards.
Explains methods for achieving proper ground connections for EMC compliance.
To Next Page