Bosch Rexroth IndraDrive HCS01 Series - Connection Diagram

5.2.2 Connection Diagram
X47 Module bus (X47.3…6) only at HCS01.1E-W00xx-x-03 devices; for sig‐
naling the readiness for operation of the device, the Bb relay contact
(X47.1, X47.2) must be wired, too
X77 (L+, L-) Only at HCS01.1E-W00xx-x-03 devices
T1, T2 Not available at MSM motors
Fig.5-2: Connection Diagram
Instruction Manual | Rexroth IndraDrive Electric Drives
and Controls
| Bosch Rexroth AG 19/65
Instructions for Use