7.3 SUP-E01-MSM-BATTERYBOX
"SUP-E01-MSM-BATTERYBOX" is a set of accessories used to operate MSM
motors with absolute value encoder and to backup the encoder data in case
voltage is switched off.
Scope of Supply
Fig.7-3: Battery Box
Battery box complete with
● Battery, type: ERC6, 3,6 V; 1800 mA, lithium
● Mounting screws: M6×30; Screw head: Torx and slot
Dimensions
Fig.7-4: Dimensions
Weight
120 g
Mounting
Mount the battery box as near as possible to the motor (maximum
distance approx. 2 m).
Fig.7-5: Boring Diagram for Battery Box
● Mounting screws: M6×30
● Tightening torque M
A
: 3 Nm
The battery box "SUP-E01-MSM-BATTERYBOX" is supplied in ready-for-op‐
eration status with battery.
Wiring: MSM encoder plug-in connector → Battery box → HCS01
Instruction Manual | Rexroth IndraDrive Electric Drives
and Controls
| Bosch Rexroth AG 51/65
Accessories
To Next Page
Loading...
