Bosch Rexroth IndraDrive HCS01 Series - Connection Points

5.2 Connection Points
5.2.1 Wiring Diagram
24V Control voltage supply
C DC bus capacitor unit (for devices with DC bus connection)
COM Communication
DST Autotransformer; optional
F Fuses
HCS01 Converter
NF Mains filter; optional (depends on EMC requirements)
HNL Mains choke; optional
K1 External mains contactor
M Motor (MSM, MSK)
RB Braking resistor (at the back of the drive controller)
Fig.5-1: Drive System Rexroth IndraDrive Cs
18/65 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraDrive | Instruction Manual
Instructions for Use