Standard Title
IEC 61131-2 Programmable controllers –
Part 2: Equipment requirements and tests
ISO 13850 Safety of machinery –
Emergency stop – Principles for design
IEC 60529 Degrees of protection provided by enclosures (IP code)
IEC 60068-2-6 Environmental testing –
Part 2-6: Tests –
Test Fc: Vibration (sinusoidal)
IEC 60068-2-27 Environmental testing –
Part 2-27: Tests –
Test Ea and guidance: Shock
IEC 60721-3-1 Classification of environmental conditions
Part 3: Classification of groups of environmental parameters
and their severities
Section 1: Storage
IEC 60721-3-2 Classification of environmental conditions
Part 3: Classification of groups of environmental parameters
and their severities
Section 2: Transportation
IEC 60721-3-3 Classification of environmental conditions
Part 3: Classification of groups of environmental parameters
and their severities
Section 3: Stationary use at weather-protected locations
Tab. 8-1: Standards used
8.2
CE marking
8.2.1 Declaration of conformity
The electronic products described in the present operating instructions comply
with the requirements and the target of the following EU directive and with the
following harmonized European standards:
EMC directive 2014/30/EC
The electronic products described in the present operating instructions are in-
tended for use in industrial environments and comply with the following require-
ments:
Bosch Rexroth AG
Standards
Control Cabinet PC
12/57
DOK-SUPPL*-VPB*40.3***-IT05-EN-P
To Next Page
Loading...
