Bosch Rexroth VT-HNC100 3X/S Series - Features

2/14 VT-HNC100.../S | Digital drive controller
Bosch Rexroth AG, RE 30159, edition: 2012-03
Features
The VT-HNC100...3X/S digital drive controller complies
with the specific requirements for closed-loop control
of hydraulic linear drives.
It is designed for being used in rough industrial environ-
ments as regards interference immunity, mechanical
vibration, shock, and climate resistance.
Areas of application
 Machine tools
 Bending machines
Technology functions
 Positioning
 Velocity controller:
– Controlled
– Regulated
 Force controller
 Substitutional closed-loop control
 Moving without following error
 Quadrant error correction
Hydraulic axes
 Measurement system:
– Incremental TTL 5V
– SSI transducer
– EnDat 2.2
– Analog 0 to ±10 V
 Actuating variable output voltage or current
 Freely confi gurable controller variants
– Position / force / velocity controller
– Substitutional closed-loop control (position/force)
Programming
 Via the control with IndraWorks
Operation
 IndraWorks
Process connection
 Digital inputs and outputs,
 Analog inputs and outputs,
 sercos II or sercos III to communicate with a supe-
rior control system
Assembly
 Top hat rail 35 mm
CE conformity
 CE conformity according to EMC Directive 2004/108/EC
and EMVG (Act on electromagnetic compatibility of
operating media) from February 26, 2008
Harmonized standards used:
EN 61000-6-2:2005
EN 61000-6-3:2007
More information
www.boschrexroth.com/hnc100