Bosch Rexroth VT-VPCD-1-1X/V0/1-P-1 - Identification of the Product; 6 Transport and Storage; Storing the VT-VPCD

Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699959
enquiries@hyquip.co.uk
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
www.hyquip.co.uk/web/index
28/60 Transport and storage
Bosch Rexroth AG, VT-VPCD, RE 30028-B/09.13
5.3 Identification of the product
At the side along the edge connector you can find a sticker that shows the most
important details.
1 Word mark
2 Country of origin
3 Material short text
4 Plant
5 Material number
6 Date of production
7 Serial number
./33
4/(.
3FYSPUI
.BEFJO(FSNBOZ

8
7571$%97
2
3
1
45
6
7
6 Transport and storage
Transport and store the control electronics VT-VPCD in the antistatic packaging, in
which it is delivered. Observe the notes on top of the packaging as well as the notes
in Chapter 2 ”Safety instructions“. In any case, when storing and transporting the
electronics, adhere to the ambient conditions given in the technical data in the data
sheet.
6.1 Storing the VT-VPCD
To prepare the control electronics for storage and further use, proceed as follows:
▶ Only use the original packaging for storing.
▶ Observe the permitted storage temperature range of -20 °C to +70 °C.
▶ Protect the VT-VPCD against dust and humidity.