Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699959
enquiries@hyquip.co.uk
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
www.hyquip.co.uk/web/index
About this documentation 7/60
RE 30028-B/09.13, VT-VPCD, Bosch Rexroth AG
1.3.2 Symbols
The following symbols refer to notes, which are not relevant to safety, but increase
the legibility of the documentation.
Table 3: Meaning of symbols
Symbol Meaning
If this information is disregarded, the product cannot be used or operated
in an optimum manner.
▶
Individual, independent step of action
1.
2.
3.
Numbered instructions for action:
The numbers indicate that the activities are to be carried out consecutively.
1.3.3 Terms used
The following terms are used in this documentation:
Table 4: Terms
Term Meaning
LVDT
Linear Variable Differential Transformer (position transducer)
U
B
Operating voltage
BODAC
Bosch Rexroth Operator Interface for Digital Axis Controllers
1.3.4 Abbreviations
The following abbreviations are used in this documentation:
Table 5: Abbreviations
Abbreviation Meaning
AI Analog Input
AO Analog Output
DI Digital Input
DO Digital Output
LSB Least Significant Bit
MSB Most Significant Bit
n.c. not connected
SWA Swivel Angle
To Next Page
Loading...
