Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699959
enquiries@hyquip.co.uk
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
www.hyquip.co.uk/web/index
RE 30028-B/09.13, VT-VPCD, Bosch Rexroth AG
3/60 Inhalt
Inhalt
1 About this documentation 5
1.1 Validity of the documentation 5
1.2 Required and supplementary documentation 5
1.3 Representation of information 6
1.3.1 Safety notes 6
1.3.2 Symbols 7
1.3.3 Terms used 7
1.3.4 Abbreviations 7
2 Safety instructions 8
2.1 About this chapter 8
2.2 Intended use 8
2.3 Improper use 8
2.4 Personnel qualifications 8
2.5 General safety instructions 9
2.6 Product-specific safety instructions 10
3 General notes on damage to material and the product 12
4 Scope of delivery 13
5 About this product 14
5.1 Performance description 14
5.2 Product description 14
5.2.1 Circuit variants 15
5.2.2 Block circuit diagrams 20
5.2.3 Display and operating elements and test sockets 23
5.2.4 Pinout of the edge connector 25
5.3 Identification of the product 28
6 Transport and storage 28
6.1 Storing the VT-VPCD 28
7 Installation 29
7.1 Unpacking 29
7.2 Required tools 29
7.3 Installation conditions 30
7.4 Recommended accessories 30
7.5 Installing the VT-VPCD 30
7.5.1 Installing the local bus 32
7.5.2 Connecting solenoids and sensorics 32
8 Commissioning 37
8.1 Initial commissioning 37
8.1.1 Establishing operational readiness 37
8.1.2 Installing software BODAC 37
9 Operation 39
9.1 Indicator/operating elements and ports of the control electronics 39
9.1.1 Menu tree for setup and parameters 39
9.2 Operating the control electronics VT-VPCD 46
9.3 Performing diagnostics 50
To Next Page
Loading...
