Bosch PDO 6 Operating Instructions

12 | English 1 609 929 K82 • 17.1.07
Functional Description
Optimal working with the measuring tool is pos-
sible only when the operating instructions and
information are read completely, and the
instructions contained therein are strictly fol-
lowed. SAVE THESE INSTRUCTIONS.
Intended Use
The measuring tool is intended for the detection of metals (ferrous
and non-ferrous metals, e.g., rebar) and “live” wires/conductors in
walls, ceilings and floors.
Product Features
The numbering of the product features shown refers to the illustra-
tion of the measuring tool on the graphic page.
1 Illuminated ring
2 Marking hole
3 Display
4 On/Off button
5 Sensor area
6 Battery lid
7 Latch of battery lid
Display Elements
a Battery indication
b “Live” wire indicator
c Measuring indicator
d“AutoCal” calibration indicator
OBJ_BUCH-308-001.book Page 12 Wednesday, January 17, 2007 9:55 AM

Bosch PDO 6 Specifications

General

Power requirements	9V

Weight and Dimensions

Weight	200 g