Before using for the first time en
7
Controls
Touching a symbol activates the associated function.
Notes
■ The settings will remain unchanged if you touch
multiple symbols at once. This allows you to wipe up
spills on the control panel.
■ Always keep the controls dry. Moisture reduces their
effectiveness.
Residual heat indicator
The appliance has a two-stage residual heat indicator.
If • appears on the display, the appliance is still hot. As
the appliance cools down further, the indicator changes
to œ. The indicator goes out when the appliance has
cooled sufficiently.
KBefore using for the first
time
Be f o r e us i ng for the first time
In this section, you can find out what you must do
before using your appliance to prepare food for the first
time. Read the safety information before you
start.~ "Important safety information" on page 4
Cleaning the appliance
Before using the appliance for the first time, clean it
thoroughly with lukewarm soapy water.
Heating up the teppanyaki surface
To eliminate the new-appliance smell, heat up the
teppanyaki surface without anything on it for a few
minutes at 200°C.
x
Stopwatch
ö
Cooking time
0
Kitchen timer/stopwatch*
e
Warming setting*
D
Childproof lock
ƒ
Rear heating zone switched off
Controls
#
Switch on the appliance
‚
Switch on the cleaning setting
0-240° Setting the temperature
0-9 Setting the kitchen timer
0
Switch on the kitchen timer/stopwatch
e
Switch on the warming setting
ƒ
Switching off the rear heating zone
Indicators
*Indicator light above the symbol lights up.
To Next Page
Loading...
