EasyManua.ls Logo

Bosch Plena Power Amplifier LB1935 - Page 2

Bosch Plena Power Amplifier LB1935
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 | LBB 1930/20 Plena Power Amplifier
Back
Level control input 1
Level control input 2
Power button
Mains switch
Interconnections
Back
Priority line input 1 (XLR/balanced)
Line loop-through 1 (XLR/balanced)
Program line input 2 (XLR/balanced)
Line loop-through 2 (XLR/balanced)
Priority controlled loudspeaker output terminals
24 VDC power supply terminal
Three loudspeaker direct output terminals
Two 100 V slave input terminals
Input 2 enable control terminal
Input 1 priority control terminal
Earth connection screw
Mains socket
Certifications and Approvals
Region Certification
Europe CE
TUV certificate IEC60849
Poland CNBOP
Safety acc. to EN 60065
Immunity acc. to EN 55103-2
Emission acc. to EN 55103-1
Emergency acc. to EN 54‑16 / EN 60849
Parts Included
Quantity Component
1 LBB 1930/20 Plena Power Amplifier
1 Power cord
1 Set of 19" mounting brackets
1 Installation and User Instructions
1 Cable with XLR connector
Technical Specifications
Electrical
Mains power supply
Voltage 230 VAC ±10%, 50/60 Hz
Inrush current 8 A
Max power consumption 400 VA
Battery power supply
Voltage 24 VDC +15% / -15%
Mains power supply
Current max 6 A
Performance
Output power (rms/maximum) 120 / 180 W
Power reduction on backup
power
-1 dB
Frequency response 50 Hz to 20 kHz (+1 / -3 dB at -10 dB
ref. rated output)
Distortion <1% at rated output power, 1 kHz
S/N (flat at max volume) >90 dB
Line inputs 2 x
Connector 3-pin XLR, balanced
Sensitivity 1 V
Impedance 20 kohm
CMRR >25 dB (50 Hz to 20 kHz)
Gain 40 dB
100 V input
Connector Screw, unbalanced
Sensitivity 100 V
Impedance 330 kohm
Line loop-through output 2 x
Connector 3-pin XLR
Nominal level 1 V
Impedance Direct connection to line input
Loudspeaker outputs 3 x
Connector Screw, floating
Direct output 100 V, 70 V, 8 ohm
Priority only (from input 1) 100 V or 70 V internally selectable
Music (non-priority) only 100 V or 70 V internally selectable
Power consumption
Mains operation
Max power 274 W
-3dB 193 W
-6dB 143 W
Pilot tone* 41 W
Idle 18 W
24 VDC operation
Max power 7.0 A (168 W)
-3 dB 6.0 A (144 W)
-6 dB 4.3 A (103 W)
Pilot tone* 0.9 A (22 W )
Idle 0.1 A (2.4 W)
* 20 kHz -20dB with maximum loudspeaker load

Related product manuals