EasyManuals Logo

Bosch PLR 40 C User Manual

Bosch PLR 40 C
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
18 | English
Digital laser measure PLR 30 C PLR 40 C
Bluetooth® Bluetooth® 4.2
(Low Energy)
E)
Bluetooth® 4.2
(Low Energy)
E)
Operating frequency range 2402–2480MHz 2402–2480MHz
Max. transmission power 2.5mW 2.5mW
A) When measuring from front edge. In unfavourable conditions such as very strong lighting, a tem-
perature greatly deviating from 25°C or a poorly reflecting surface, the measuring range can be
restricted.
B) In unfavourable conditions such as strong lighting, high altitudes or a poorly reflecting surface, the
maximum deviation can be ±4mm with a deviation of ±0.15mm/m. In favourable conditions, a
deviation of ±0.05mm/m needs to be taken into account.
C) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by con-
densation is expected.
D) Bluetooth® deactivated
E) When using Bluetooth® Low Energy devices, it may not be possible to establish a connection de-
pending on the model and operating system. Bluetooth® tools must support the GATT profile.
The serial number (11) on the type plate is used to clearly identify your measuring tool.
Inserting/Changing the Battery
Always replace all the non-rechargeable batteries at the same time. Only use non-
rechargeable batteries from the same manufacturer and which have the same ca-
pacity.
When inserting the batteries, ensure that the polarity is correct according to the il-
lustration on the inside of the battery compartment.
u Take the non-rechargeable batteries out of the measuring tool if you are not using
it for a long time. The non-rechargeable batteries can corrode and self-discharge dur-
ing prolonged storage.
Operation
Start-Up
u Never leave the measuring tool unattended when switched on, and ensure the
measuring tool is switched off after use. Others may be dazzled by the laser beam.
u Protect the measuring tool from moisture and direct sunlight.
u Do not expose the measuring tool to any extreme temperatures or variations in
temperature. For example, do not leave it in a car for extended periods of time. In case
1 609 92A 6KX | (24.06.2021) Bosch Power Tools

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bosch PLR 40 C and is the answer not in the manual?

Bosch PLR 40 C Specifications

General IconGeneral
Package typeBox
Laser class2
Leveling time0.5 s
Maximum range40 m
Leveling accuracy (±)2 mm/m
Self-leveling range (±)- °
Battery typeAAA
Auto power offYes
Battery voltage1.5 V
Battery technologyAlkaline
Auto power off after5 min
TypeLine level
Product colorGreen
Weight and Dimensions IconWeight and Dimensions
Weight80 g

Related product manuals