English - 1
The numbering of the machine elements refers to
the representation of the machine on the graph-
ics page.
1 Fine-adjustment knob for depth-of-cut
(POF 1300 ACE)
2 Scale for fine adjustment of depth-of-cut
(POF 1300 ACE)
3 Clamping lever
4 Handle, left
5 Scale for coarse adjustment of depth-of-cut
6 Depth stop
7 Slider with index mark
8 Wing screw for depth stop
9 Dust boots
10 Release lever for guide bushing
11 Step buffer
12 Base plate
13 Guide plate
14 Router bit*
15 Chip shield
16 Locking screw for guide rod
17 Tightening nut with collet
18 Spindle lock button
19 Handle, right (with On/Off switch 23)
20 Lock-off button
21 Screws for step buffer (POF 1100 AE)
22 Thumbwheel for speed preselection
23 On/Off switch
24 Markings for zero-reset
25 Open-end spanner
26 Knurled screw (2 x)
27 Extraction adapter*
28 Vacuum hose Ø 35 mm*
29 Guide bushing*
30 Parallel guide
31 Guide rod (2 x)
32 Centring pin
33 Wing bolt for centring pin
34 Curve buffer*
35 Router compass/guide-rail adapter**
36 Router compass handle**
37 Locking screw for “coarse adjustment of
router compass” (2 x)*
38 Locking screw for “fine adjustment of router
compass” (1 x)*
39 Fine adjustment for router compass*
40 Centring screw**
41 Base spacer (contained in
„Router compass set 2 609 200 143“)**
42 Guide rail**
** Accessory usable only with separate parallel guide
3 607 000 606.
* Not all of the accessories illustrated or described are
included as standard delivery.
Tool Specifications
Plunge router POF 1100 AE POF 1300 ACE
Order number 0 603 26A 0.. 0 603 26C 7..
Rated input power* [W] 1 100 1 300
Output power [W] 550 650
No-load speed [rpm] 11 000 – 28 000 11 000 – 28 000
Constant electronic control – ●
Speed preselection ● ●
Dust extraction ● ●
Tool holder [mm] 6/8
1/4"
6/8
1/4"
Plunge depth [mm] 55 55
Weight without cable, approx. [kg] 3.0 3.0
Protection class / II / II
Please observe the order number of your machine. The trade names of the individual machines may vary.
* The values given are valid for nominal voltages [U] of 230/240 V. For lower voltages and models for specific countries,
these values can vary.
Machine Elements
1 609 929 F23 - Buch Seite 1 Montag, 19. April 2004 8:27 08
13 • 1 609 929 F23 • 04.04
To Next Page
Loading...
