32 | English
1 609 929 T11 | (18.1.10) Bosch Power Tools
Symbols
The following symbols can be important for the operation of your power tool. Please memorise the
symbols and their meanings. The correct interpretation of the symbols helps you operate the power
tool better and more secure.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The power tool is intended as a stationary ma-
chine for making straight lengthways and cross-
ways cuts in wood. In this, mitre angles from
–52° to +52° as well as bevel angles from 0° to
45° are possible.
The capacity of the power tool is designed for
sawing hardwood and softwood.
The power tool is not suitable for cutting alumin-
ium or other non-ferrous metals or alloys.
Symbol Meaning
f Wear a dust respirator.
f Wear safety goggles.
f Wear ear protectors. Exposure to noise can cause hearing loss.
Observe the dimensions of the saw blade. The hole diameter must
match the tool spindle without play. Do not use reducers or adapters.
f Danger area! Keep hands, fingers or arms away from this area.
Only for EC countries:
Do not dispose of power tools into household waste!
According the European Guideline 2002/96/EC for Waste Electrical and
Electronic Equipment and its implementation into national right, power
tools that are no longer usable must be collected separately and dis-
posed of in an environmentally correct manner.
OBJ_BUCH-1040-001.book Page 32 Monday, January 18, 2010 12:35 PM
To Next Page
Loading...
