Bosch Professional GLM 50-22 - Battery Management

English | 25
Digital laser measure GLM 50-22 GLM 50-25 G
Capacity 1.0Ah 1.0Ah
Number of battery cells 1 1
Permitted charging temperature
range
0°C to +60°C 0°C to +60°C
Power supply
Output voltage
5.0V 5.0V
Min. output current 500mA 500mA
Recommended power supply
E)
2609120713 (EU)
2609120718 (UK)
1600A013A0 (ARG)
1600A013A1 (MEX)
1600A013A2 (BRL)
2609120713 (EU)
2609120718 (UK)
1600A013A0 (ARG)
1600A013A1 (MEX)
1600A013A2 (BRL)
A) When measuring from the front edge of the measuring tool, this applies for high reflectivity of the
target (e.g. a wall painted white), weak background lighting and a 25°C operating temperature; a
distance-dependent deviation of ±0.05mm/m must additionally be factored in.
B) When measuring from the front edge of the measuring tool, this applies for high reflectivity of the
target (e.g. a wall painted white), strong background lighting, 25°C operating temperature and
large altitudes. In addition, a deviation of ±0.15mm/m must be taken into account, depending on
the distance.
C) In continuous measurement mode, the max. operating temperature is +40 °C.
D) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by con-
densation is expected.
E) For additional technical data, visit: https://www.bosch-professional.com/ecodesign
The serial number (11) on the type plate is used to clearly identify your measuring tool.
Inserting/Changing the Battery
Always replace all the batteries/rechargeable batteries at the same time. Only use
batteries/rechargeable batteries from the same manufacturer and which have the
same capacity.
When inserting the batteries, ensure that the polarity is correct according to the il-
lustration on the inside of the battery compartment.
Bosch Power Tools 1 609 92A 7CD | (02.02.2022)