The Bosch GSB 600 Professional is an impact drill designed for a variety of drilling and screwdriving applications. It is a corded power tool, emphasizing robust performance and user safety.
Function Description:
The GSB 600 Professional is primarily intended for impact drilling in tough materials such as brick, concrete, and stone. Beyond impact drilling, it is also capable of standard drilling in wood, metal, ceramic, and plastic. Equipped with electronic control and a rotational direction switch, the tool can also be used for screwdriving and thread cutting, offering versatility across different tasks. The "drilling/impact drilling" selector switch (2) allows the user to easily switch between modes, clicking into place for secure operation. The on/off switch (4) controls the power, with a lock-on button (3) for continuous operation. The rotational direction switch (5) enables clockwise rotation for drilling and screwdriving, and counter-clockwise rotation for loosening screws and nuts. The speed and impact rate are adjustable by varying the pressure on the on/off switch (4), providing precise control for different materials and applications.
Important Technical Specifications:
- Rated Power Input: 600 W
- Power Output: 300 W
- No-load Speed: 0–3000 min⁻¹
- Impact Rate at No-load Speed: 0–48000 min⁻¹
- Rated Torque: 1.4 Nm
- Spindle Collar Diameter: 43 mm
- Max. Drilling Diameter:
- Concrete: 13 mm
- Masonry: 13 mm
- Steel: 10 mm
- Wood: 25 mm
- Chuck Capacity: 1.5–13 mm
- Weight (according to EPTA-Procedure 01:2014): 1.7 kg
- Protection Class: II
- Rotational Direction: Clockwise/anti-clockwise rotation (indicated by •)
These specifications highlight the tool's capability for demanding tasks while maintaining a manageable weight for user comfort.
Usage Features:
The GSB 600 Professional is designed with several features to enhance usability and safety:
- Auxiliary Handle (6): This handle provides an insulated gripping surface and can be adjusted to 12 different positions to achieve a safe and comfortable work posture, minimizing fatigue. It is crucial to operate the power tool with the auxiliary handle attached.
- Depth Stop (7): The depth stop allows for precise setting of the drilling depth (X), ensuring consistent results. The fluting on the depth stop must face downwards for correct operation.
- Keyed Chuck (1): The keyed chuck securely holds drill bits and screwdriving tools. It is tightened using the chuck key (9) inserted into the corresponding holes.
- Screwdriving Tools (10) and Universal Bit Holder (11): For screwdriving, it is recommended to use a universal bit holder with appropriate screwdriver bits. The "drilling/impact drilling" selector switch (2) should be set to the "drilling" symbol for screwdriving.
- Dust/Chip Extraction: The manual emphasizes the importance of proper ventilation and, if available, connecting dust extraction and collection facilities to reduce dust-related hazards. This is particularly important when working with materials that produce harmful dust, such as lead-containing coatings, certain wood types, minerals, and metal.
- Personal Safety: Users are advised to wear personal protective equipment, including eye protection, dust masks, non-skid safety shoes, hard hats, and hearing protection, especially during impact drilling. Maintaining proper footing and balance, avoiding overreach, and dressing appropriately are also stressed.
- Electrical Safety: The tool features an insulated gripping surface (8) to protect against electric shock when drilling near hidden wiring. Users are reminded to match power tool plugs with outlets, avoid modifying plugs, and use extension cords suitable for outdoor use when operating outdoors. A residual current device (RCD) is recommended for damp locations.
- Starting Operation: Before connecting to a power source, ensure the switch is in the off-position to prevent unintentional starting. The mains voltage must match the voltage specified on the rating plate.
- Practical Advice: For optimal performance, the manual suggests operating the tool at maximum speed without load for approximately three minutes after extended low-speed use to cool it down. When drilling into tiles, start in "drilling" mode and switch to "impact drilling" after penetrating the tile. Carbide drill bits are recommended for concrete, stone, and masonry, while sharpened HSS drills are advised for metal.
Maintenance Features:
Regular maintenance is crucial for the safe and efficient operation of the GSB 600 Professional:
- Cleaning: Always disconnect the power tool from the power source before performing any maintenance or cleaning. Keep the power tool and its ventilation slots clean to ensure safe and efficient operation.
- Cord Replacement: If the power supply cord needs to be replaced, it must be done by Bosch or an authorized after-sales service center to avoid safety hazards.
- Tool Changes: Wear protective gloves when changing tools, as the drill chuck can become hot during prolonged use. The drill chuck should be tightened with a torque of approximately 30-35 Nm. If the power tool does not have a drill spindle locking mechanism, the drill chuck must be changed by an authorized Bosch service center.
- General Maintenance: Regularly check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool's operation. Damaged power tools should be repaired before use.
- Storage: Store idle power tools out of the reach of children and prevent operation by persons unfamiliar with the tool or its instructions.
- Disposal: The power tool, accessories, and packaging should be recycled in an environmentally friendly manner and not disposed of with household waste.
The Bosch GSB 600 Professional is a versatile and powerful impact drill designed for both professional and DIY users, with a strong emphasis on safety, performance, and ease of use across a wide range of applications.
Need help?
To Next Page
General
