Bosch RCK3 VCI - SAFETY INSTRUCTIONS; CAUTIONS AND NOTICES; SYSTEM REQUIREMENTS

BMW RCK3 VCI User Manual
Version 1.0.2 Page 4
© Bosch 2015
SAFETY INSTRUCTIONS
Please read and review all instructions, warnings and information included in this manual prior to
start-up, connection and operation of the BMW RCK3 VCI.
CAUTIONS AND NOTICES
In this User’s Guide:
• CAUTION: indicates there is a possibility of injury to you or other people.
• NOTICE: indicates the possibility of damage to the component being worked on.
Operating Precautions
NOTICE
• Make sure all cables and adapters are firmly connected before starting to use the BMW
RCK3 VCI.
Always read the instructions completely before attempting a new procedure.
SYSTEM REQUIREMENTS
USE: RCK3 VCI, Firmware and VCI Manager Software can be used on multiple computer
systems with the following minimum PC requirements:
Processor:
Intel Pentium II 450MHz, AMD Athlon® 600MHz or faster processor (or equivalent)
Memory:
128MB of RAM
Operating System:
Windows 7, Windows 8 and Windows 8.1 (32 & 64 bit)