Bosch Rexroth 11 Series - Table of Contents

Contents 3/64
RE 92511-01-B/2019-10-09, A15V(L)O Series 11, BoschRexroth AG
1 About this documentation 5
1.1 Validity of the documentation 5
1.2 Required and supplementary documentation 5
1.3 Representation of information 6
1.3.1 Safety instructions 6
1.3.2 Symbols 7
1.3.3 Designations 7
1.3.4 Abbreviations 7
2 Safety instructions 8
2.1 About this chapter 8
2.2 Intended use 8
2.3 Improper use 8
2.4 Personnel qualifications 9
2.5 General safety instructions 10
2.6 Product-specific safety instructions 11
2.7 Personal protective equipment 14
3 General instructions on property damage and product damage 15
4 Scope of delivery 18
5 About this product 19
5.1 Performance description 19
5.2 Product description 19
5.2.1 Axial piston unit layout 19
5.2.2 Functional description 20
5.3 Product identification 21
6 Transportand storage 22
6.1 Transporting the axial piston unit 22
6.1.1 Transportby hand 22
6.1.2 Transportwith lifting devices 23
6.2 Storing the axial piston unit 25
7 Installation 27
7.1 Unpacking 27
7.2 Installation conditions 27
7.3 Installation position 29
7.3.1 Below-reservoir installation (standard) 29
7.3.2 Inside-reservoir installation 30
7.3.3 Above-reservoir installation 31
7.4 Installing the axial piston unit 32
7.4.1 Preparation 32
7.4.2 Dimensions 32
7.4.3 General instructions 33
7.4.4 Installation with a coupling 33
7.4.5 Installation on a gearbox 34
7.4.6 Installation with cardan shaft 35
7.4.7 Completion of assembly 35
7.4.8 Hydraulically connecting the axial piston unit 37
7.4.9 Electrically connecting the axial piston unit 44
7.5 Performing flushing cycle 45
Contents