Bosch Rexroth EC302 - 1 About this Documentation; Validity of the Documentation; Required and Amending Documentation

EC30X | 3 609 929 728/2014-01 Bosch Rexroth AG 39/72
ENGLISH
1 About this documen-
tation
This chapter contains general information
on the present instructions.
1.1 Validity of the documen-
tation
This documentation applies to servomotors.
This documentation aims at persons com-
missioned with the assembly, commissio-
ning, maintenance, troubleshooting and di-
sassembly of servomotors.
This documentation contains important in-
formation on the safe and appropriate as-
sembly, transportation, commissioning,
maintenance, disassembly and simple trou-
bleshooting of servomotors.
 Read this documentation completely
and particularly the chapter "Safety Ins-
tructions", before working with the pro-
duct.
1.2 Required and amending
documentation
Servomotors are components of Rexroth
tightening spindles.
 Only commission the product if the do-
cumentation marked with the book
symbol is available to you and you have
understood and observed it.
NOTE
Outdated documentation!
If you use an outdated version of the pre-
sent as well as the required and supple-
mentary documentation, this may lead to
an incorrect assembly and operation of
the product.
 Make sure that you always have and
use the current version of any docu-
mentation. The current version of the
documentation of Bosch Rexroth can
be found in the media directory:
http://www.boschrexroth.com/me-
dienverzeichnis