40/72 Bosch Rexroth AG EC30X | 3 609 929 728/2014-01
Additional information on the pro-
ject planning can be found in the
project planning manual of the
Rexroth Tightening System. Notes
on the commissioning can be found
in the online help for the operating
system.
1.3 Representation of infor-
mation
In order to enable you to work with your pro-
duct in a fast and safe way, uniform safety
instructions, symbols, terms and abbrevia-
tions are used. For a better understanding,
they are explained in the following sections.
1.3.1 Safety instructions
In this documentation, there are safety inst-
ructions before the sequence whenever
there is a risk of personal injury or damage
to equipment. The measures described to
avoid these hazards must be observed.
Tab. 1: Required and supplementary documentation
Title Document number Document type
Safety Instructions for Rexroth Tigh-
tening Systems
3 608 870 2DE Safety regulation
Rexroth Tightening Spindle 3 608 870 0… Installation instructions
Documentation of the machine or
system manufacturer
Instructions for the other system
components
Generally applicable, legal and
other binding regulations of Euro-
pean and national legislation
Provisions for accident prevention
and environmental protection appli-
cable in your country
DIN 13 sheet 13
To Next Page
Loading...
