Need help?Do you have a question about the Bosch Rexroth MS2S and is the answer not in the manual?
Explains the purpose and different versions of the documentation.
Describes how information is presented within the manual, including safety symbols and instructions.
Provides essential guidelines for the proper and safe utilization of the motors.
Details the specific applications and environments for which the motors are designed.
Outlines general safety precautions applicable to all users and situations.
Outlines safety measures specific to the product's technology and features.
Details crucial safety precautions related to high electrical voltage and shock hazards.
Advises on safety measures to prevent injuries from dangerous mechanical movements.
Addresses health hazards associated with magnetic and electromagnetic fields.
Warns about potential burns from hot motor surfaces and provides precautions.
Warns about potential damage to components from electrostatic discharge.
Explains how to identify the motor and its specifications, including the type plate.
Details the information provided on the motor's type plate for product identification.
Explains the meaning of the digits used in the motor's type code.
Highlights specific safety signs and warnings directly affixed to the motor.
Lists fundamental technical specifications and operating parameters of the motors.
Details the physical dimensions, flange, and shaft end specifications.
Describes the integrated system for monitoring and protecting the motor from thermal overload.
Explains the self-cooling mechanism (IC410) and its operational requirements.
Describes the encoder system, its performance, and data output.
Explains the IP protection types according to EN 60034-5 for motors.
Details the specifications and considerations for the output shaft and attached elements.
Describes the optional spring force holding brakes and their operation.
Discusses factors influencing bearing lifetime and provides calculation basis.
Describes the forces acting on the motor shaft and bearing during operation.
Details motor dimensions and mounting configurations according to EN 60034-7.
Provides guidelines for storing motors in their original packaging under specific environmental conditions.
Outlines requirements and precautions for transporting motors, including air transport.
Specifies permissible shock load limits for motors during transport and storage.
Details the procedure and precautions for mounting the motor using its flange.
Guides on attaching transmission elements like pulleys and couplings to the motor shaft.
Provides general notes and warnings for making electrical connections to the motor.
Covers essential safety and procedural information for electrical hookups.
Details the circuit diagram for single cable connection with encoder and optional brake.
Describes the M17 connector, its features, and adjustment range for cable connection.
Provides instructions on how to connect the SpeedTec connector properly.
Highlights critical safety warnings related to operating the motor and its connections.
Details the pre-commissioning checks and procedures for MS2S motors.
Specifies the climatic and environmental conditions for optimal motor operation.
Provides guidelines for monitoring and ensuring proper operation of the motor.
Explains how to adjust motor performance when operating outside standard ambient conditions.
Provides instructions for cleaning and maintaining the motor and its connections.
Outlines procedures for professional repair, maintenance, and replacement of parts.
Lists available spare parts for the MS2S motors, including connector part numbers.
Lists essential tools needed for disassembling transmission elements and performing maintenance.
Provides step-by-step instructions for safely replacing the motor.
Instructions for preparing motors for storage, including attaching protective covers.
Information on how to properly recycle motor components and materials.
Identifies the primary materials that constitute the motor's construction.
Details safety hazards and handling precautions related to permanent magnets.
Details disposal requirements and symbols for batteries and accumulators.
Information on returning products to Bosch Rexroth for proper disposal.
Provides detailed technical specifications and characteristic curves for MS2S motors.
Contains the official EU declaration confirming compliance with relevant directives.
Indicates that UL/CSA conformity information is found on the motor's type plate.
States that China RoHS 2 conformity information is available on the motor's type plate.
Explains the purpose and different versions of the documentation.
Describes how information is presented within the manual, including safety symbols and instructions.
Provides essential guidelines for the proper and safe utilization of the motors.
Details the specific applications and environments for which the motors are designed.
Outlines general safety precautions applicable to all users and situations.
Outlines safety measures specific to the product's technology and features.
Details crucial safety precautions related to high electrical voltage and shock hazards.
Advises on safety measures to prevent injuries from dangerous mechanical movements.
Addresses health hazards associated with magnetic and electromagnetic fields.
Warns about potential burns from hot motor surfaces and provides precautions.
Warns about potential damage to components from electrostatic discharge.
Explains how to identify the motor and its specifications, including the type plate.
Details the information provided on the motor's type plate for product identification.
Explains the meaning of the digits used in the motor's type code.
Highlights specific safety signs and warnings directly affixed to the motor.
Lists fundamental technical specifications and operating parameters of the motors.
Details the physical dimensions, flange, and shaft end specifications.
Describes the integrated system for monitoring and protecting the motor from thermal overload.
Explains the self-cooling mechanism (IC410) and its operational requirements.
Describes the encoder system, its performance, and data output.
Explains the IP protection types according to EN 60034-5 for motors.
Details the specifications and considerations for the output shaft and attached elements.
Describes the optional spring force holding brakes and their operation.
Discusses factors influencing bearing lifetime and provides calculation basis.
Describes the forces acting on the motor shaft and bearing during operation.
Details motor dimensions and mounting configurations according to EN 60034-7.
Provides guidelines for storing motors in their original packaging under specific environmental conditions.
Outlines requirements and precautions for transporting motors, including air transport.
Specifies permissible shock load limits for motors during transport and storage.
Details the procedure and precautions for mounting the motor using its flange.
Guides on attaching transmission elements like pulleys and couplings to the motor shaft.
Provides general notes and warnings for making electrical connections to the motor.
Covers essential safety and procedural information for electrical hookups.
Details the circuit diagram for single cable connection with encoder and optional brake.
Describes the M17 connector, its features, and adjustment range for cable connection.
Provides instructions on how to connect the SpeedTec connector properly.
Highlights critical safety warnings related to operating the motor and its connections.
Details the pre-commissioning checks and procedures for MS2S motors.
Specifies the climatic and environmental conditions for optimal motor operation.
Provides guidelines for monitoring and ensuring proper operation of the motor.
Explains how to adjust motor performance when operating outside standard ambient conditions.
Provides instructions for cleaning and maintaining the motor and its connections.
Outlines procedures for professional repair, maintenance, and replacement of parts.
Lists available spare parts for the MS2S motors, including connector part numbers.
Lists essential tools needed for disassembling transmission elements and performing maintenance.
Provides step-by-step instructions for safely replacing the motor.
Instructions for preparing motors for storage, including attaching protective covers.
Information on how to properly recycle motor components and materials.
Identifies the primary materials that constitute the motor's construction.
Details safety hazards and handling precautions related to permanent magnets.
Details disposal requirements and symbols for batteries and accumulators.
Information on returning products to Bosch Rexroth for proper disposal.
Provides detailed technical specifications and characteristic curves for MS2S motors.
Contains the official EU declaration confirming compliance with relevant directives.
Indicates that UL/CSA conformity information is found on the motor's type plate.
States that China RoHS 2 conformity information is available on the motor's type plate.
General| Number of safety inputs | 2 |
|---|---|
| Number of safe outputs | 2 |
| Protection Class | IP20 |
| Safety functions | STO |
| Cooling Method | Natural convection |
| Relative Humidity | 5-95% (non-condensing) |
To Next Page
