56/72 Bosch Rexroth AG EC30X | 3 609 929 728/2014-01
If the product is installed in an overall sys-
tem, no further manual operation is requi-
red. The tightening channel, the tightening
programs and applications, etc. are confi-
gured or changed via the operating pro-
gram of the tightening system, e.g. BS300
or BS350.
9 Maintenance and
repair
9.1 Cleaning and care
For cleaning Rexroth tightening spind-
les and their components, use the
LOCTITE® 7063™ detergent, see sub-
sequent manufacturer's information.
CAUTION
High torques with hand-held
Rexroth tightening spindles!
If tightenings with higher torques are car-
ried out with a hand-held Rexroth tigh-
tening spindle, injuries, particularly at the
joints, may result due to the acting
forces.
Assemble and use a torque support.
CAUTION
Direct contact with the detergent!
Direct skin or eye contact with the deter-
gent as well as swallowing or inhaling
the detergent may cause injuries.
Avoid direct physical contact with the
detergent.
Observe the instructions for use and
first aid in the "Technical safety
sheet" as well as in the "Safety data
sheet" of the detergent manufacturer.
NOTE
Penetrating dirt or liquids!
Failures may occur. Safe function of the
product is no longer ensured.
Always provide for absolute clean-
liness when working at the product.
Manufactu-
rer:
Henkel AG & Co. KGaA
Henkelstr. 67
40191 Düsseldorf
Germany
To Next Page
Loading...
