Bosch Rexroth HEDE10-30/400/1/-Ga-K35-V User Manual

Electronic pressure sensor
with switching and analog
output
Type HEDE 10-3X
Operating instructions
RE 30277-02-B/07.2016
Replaces: 07.2010
English

Bosch Rexroth HEDE10-30/400/1/-Ga-K35-V Specifications

General

Manufacturer	Bosch Rexroth
Maximum operating pressure	350 bar
Mounting type	Subplate mounting
Voltage	24 VDC
Type of actuation	Electrical

Summary

Electronic Pressure Sensor HEDE 10-3X

1 About this Documentation

2 Safety Instructions

2.2 Intended Use

Describes the product's intended applications and usage conditions.

2.3 Improper Use

2.4 Personnel Qualifications

Specifies the required knowledge and qualifications for handling the product.

2.5 General Safety Instructions

Provides general safety rules for installation, operation, and maintenance.

2.6 Product-Specific Safety Instructions

Highlights safety warnings specific to the pressure sensor's operation.

5 About this Product

5.1 Applications

5.2 Function

7 Installation

7.1 Electrical Connection

8 Commissioning

8.1 Operating and Display Elements

8.2 Menu

Overview of the menu structure, levels, and parameter explanations.

8.3 Parameter Setting

Step-by-step guide for setting parameters on the device.

8.4 Configuring the Display

8.5 Setting the Output Signals

Configuration of switching and analog output functions and limits.

8.6 User Settings

9 Operation

10 Maintenance and Repair

10.3 Repair

11 Demounting and Replacement

14 Troubleshooting

14.1 Self-Diagnosis/Error Indications

Explanation of the unit's diagnostic capabilities and error codes.

15 Technical Data