Bosch Rexroth HEDE10-30/400/1/-Ga-K35-V - Symbols

About this documentation 7/48
RE 30277-02-B/07.2016, HEDE 10-3X, Bosch Rexroth AG
• Consequences: describes the consequences in case of non-
compliance
• Precaution: Species how the danger can be prevented
Tabelle 2: Hazard classes according to ANSI Z535.6-2006
Warning sign, signal word Meaning
DANGER
Indicates a hazardous situation which,
if not avoided, will certainly result in
death or serious injury.
WARNING
Indicates a hazardous situation which,
if not avoided, could result in death or
serious injury.
CAUTION
Indicates a hazardous situation which,
if not avoided, could result in minor or
moderate injury.
NOTICE
Damage to property: The product or the
environment could be damaged.
1.3.2 Symbols
The following symbols indicate notices which are not safety-relevant
but increase the comprehensibility of the documentation.
Tabelle 3: Meaning of the symbols
Symbol Meaning
If this information is not observed, the product cannot be used
and/or operated optimally.
1.
2.
3.
Numbered instruction:
The numbers indicate that the actions must be carried out one
after the other.
[...] Designation of keys, buttons or indications