R911310375 / 02 | Rexroth IndraControl VCP 02 Electric Drives and Controls | Bosch Rexroth AG 2-1
Important Directions for Use
2 Important Directions for Use
2.1 Appropriate Use
2.1.1 Introduction
Rexroth products represent state-of-the-art developments and manu-
facturing. They are tested prior to delivery to ensure operating safety
and reliability.
The products may only be used in the manner that is defined as appro-
priate. If they are used in an inappropriate manner, then situations can
develop that may lead to property damage or injury to personnel.
Before using Rexroth products, make sure that all the pre-requisites for
appropriate use of the products are satisfied:
• Personnel that in any way, shape or form uses our products must first
read and understand the relevant safety instructions and be familiar
with appropriate use.
• If the product takes the form of hardware, then they must remain in
their original state, in other words, no structural changes are permit-
ted. It is not permitted to decompile software products or alter source
codes.
• Do not mount damaged or faulty products or use them in operation.
• Make sure that the products have been installed in the manner de-
scribed in the relevant documentation.
Bosch Rexroth, as manufacturer, is not liable for any damages resulting
from inappropriate use. In such cases, the guarantee and the right to
payment of damages resulting from inappropriate use are forfeited. The
user alone carries all responsibility of the risks.
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
To Next Page
Loading...
Need help?
General
