Need help?Do you have a question about the Bosch Rexroth SE352 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | Rexroth SE352 |
| Category | Control Unit |
| Language | English |
Lists related documentation and general regulations applicable to the control unit.
Defines the proper application and integration of the control unit within a machine or system.
States that any use not described as intended is considered improper.
Specifies that assembly, commissioning, and operation require qualified personnel with basic technical knowledge.
Explains the structure and meaning of safety warnings and symbols used in the manual.
Provides general instructions for safe operation and system integrity, including system safety.
Safety guidelines for assembling the product, covering power, voltage, and cable management.
Outlines safety steps and precautions for acclimating and commissioning the control unit.
Provides guidelines for safe and effective cleaning of the product, emphasizing protection against liquids.
Instructions for proper disposal of the product according to national environmental regulations.
Lists the items included in the product package, such as the control unit and operating instructions.
Details the control unit's capability to manage tightening channels and associated servo amplifiers.
Identifies and labels key physical components of the SE352/SE352M unit via a diagram.
Describes the B-slot interface for type B modules and lists compatible Rexroth modules.
Explains the function of the status LEDs and the reset button for monitoring and control.
Details the type A USB host interfaces and their compliance with USB 2.0 specifications.
Describes the type B USB device interface for PC connection, programming, and parameterization.
Explains the interface intended for mass storage devices, such as the CF350.
Advises observing specified ambient conditions for product transport and storage.
Provides crucial safety warnings and procedural steps for assembling the control unit.
Outlines the steps and prerequisites for commissioning the control unit, including checks and settings.
States that operational tasks are not required while the system is actively running.
Provides safety warnings for cleaning and emphasizes maintaining absolute cleanliness during work.
States the control unit is maintenance-free if used according to its intended purpose.
Details the software and hardware reset functions available via the reset button.
Step-by-step guide for safely exchanging the unit's battery, including precautions against short-circuits.
Refers to a specific chapter for details on how to disassemble and replace the control unit.
Provides safety warnings and procedural steps for disassembling the SE352/SE352M control unit.
Emphasizes responsible disposal to prevent pollution and refers to applicable regulations.
States that the SE352/SE352M control unit should not be converted or modified.
Explains how malfunctions are displayed and advises contacting support for unresolved issues.
Presents technical specifications including order numbers, operating temperatures, humidity, and dimensions.
Provides contact information for Rexroth service, including phone, email, and worldwide support.
Provides contact information for Bosch Rexroth AG Sales department, including address and phone.
To Next Page