Need help?Do you have a question about the Bosch Rexroth M4-12 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | Rexroth M4-12 |
| Category | Control Unit |
| Language | English |
This documentation applies to the Load sensing control block M4-12.
Lists required and supplementary documentation for commissioning the product.
Explains the structure and types of safety instructions used in the manual.
Explains symbols used to increase understanding of the manual, not directly relevant to safety.
Lists designations used in the documentation for components and terms.
Lists abbreviations used throughout the manual for technical terms.
Emphasizes reading the instruction manual thoroughly before working on the product.
Defines skilled personnel and specialist knowledge required for working with the product.
Details safety instructions for handling suspended loads, machines under pressure, and escaping oil mist.
Outlines the responsibility for personal protective equipment and recommends specific items.
Instructions for handling and maintaining control block housings and parts to prevent damage.
Guidelines for cleaning and maintaining flange and sealing surfaces to prevent damage and ensure proper function.
Specifies the use of protective braces with hard rubber when using a vise.
Lists essential tools for assembly, disassembly, and maintenance of the control block.
Explains how to identify the control block and its segments using the type plate information.
Details the designation of ports and connections on the control block.
Describes the flange interface and its layout with internal functions.
Lists the available control block segments: Inlet plate, Directional valves, and End plate.
Details the internal functions of the inlet plate, including relief valve and pressure compensator.
Shows the external connections for the end plate, including a measuring port.
Lists related documents providing detailed instructions for assembly, disassembly, and repair.
Provides guidelines for screw connections of hydraulic connections, including pipe thread standards.
Details the process for screw connections on control block segments using a torque wrench.
Provides information on finding available accessories and spare parts on the Bosch Rexroth website.
Lists sources for obtaining accessories and spare parts and provides contact information for service.
To Next Page