Bosch Rexroth SE352 - Product Description; Performance Overview; Device Component Identification

3 609 929 B61/2008-09 | SE352/SE352M Bosch Rexroth AG 21/88
ENGLISH
ENGLISH
ITALIANO
ESPAÑOL
PORTUGUÊS
SVENSKA
FRANÇAIS
4 Product description
Performance description
The SE352/SE352M control unit is intended
for installation in the BT356 card rack and
SB35x system box. It can control a maximum
of two tightening channels; i.e. it provides the
control signals for two servo amplifiers and
two tightening spindles or ErgoSpin hand-
held nutrunners. Two tightening channels
can thus be used with one control unit.
For further information please refer to the
system documentation on the SW350
system stick.
Device description
Fig. 1: SE352/SE352M view
Explanation of Fig. 1:
1 Only for SE352M: slot B1 for installation
of a standard type B module
2 LED for tightening channels 1 and 2 and
reset button
3 USB device interface (X3U3),
specification 2.0-compatible
4 Two USB host interfaces (X3U1, X3U2),
specification USB 2.0
5 Battery
6 Mass storage slot (X6C1)
1
5
6
1
2
3
4
SE352M
Reset
Reset
B1
B1
1
X3U1 X3U2 X3U3
2