EasyManua.ls Logo

Bosch REXROTH IndraDrive HMV01 User Manual

Bosch REXROTH IndraDrive HMV01
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operating Instructions
Electric Drives
and Controls Pneumatics
Service
Linear Motion and
Assembly Technologies
Hydraulics
Rexroth IndraDrive
Supply Units
HMV01
R911339050
Edition 01

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Bosch REXROTH IndraDrive HMV01 and is the answer not in the manual?

Bosch REXROTH IndraDrive HMV01 Specifications

General IconGeneral
BrandBosch
ModelREXROTH IndraDrive HMV01
CategoryPower Supply
LanguageEnglish

Summary

Important Notes and Safety Instructions

1.1 Safety Instructions

General safety information, precautions, and warnings for operating and installing the drive system.

1.1.2 Protection Against Electrical Hazards

Details safety measures for preventing contact with live electrical parts and hazardous voltages.

1.1.3 Protection Against Dangerous Movements

Covers safety precautions to prevent accidents caused by unintended machine movements.

1.1.4 Magnetic Fields and Hot Surfaces

Addresses health hazards from magnetic fields and warns about hot surfaces.

1.1.5 Handling, Mounting, and Battery Safety

Provides safety guidelines for handling, mounting, and details battery safety precautions.

1.2 Appropriate Use

Defines the intended applications and environmental conditions for product use.

Identification, Ratings, and Documentation

2.1 Type Code and Type Plates

Explains type code structure and information on device type plates.

3 Ratings and Dimensions

Presents UL ratings and dimensions for HMV01.1E and HMV01.1R models.

4 Documentations

Lists available documentation for drive systems, motors, cables, and firmware.

Instructions for Use

5.1 Power Supply and Input Voltage

Explains the power supply requirements and input voltage specifications for the drive system.

5.2 Key Connection Points

Details essential electrical connection points and diagrams for the drive system.

5.2.1 Wiring Diagram

Provides a general wiring diagram for the drive system components.

5.2.2 Connection Diagrams

Shows connection diagrams for various HMV supply unit models.

5.2.3 Mains, Ground, and Shield Connections

Details mains, ground, and shield connections for unit installation and safety.

5.2.6 Control, Signal, and Message Interfaces

Details interfaces for control signals, messages, and mains contactor operation.

EMC Measures for Design and Installation

6.1 EMC Installation Rules

Outlines basic rules for designing installations to comply with EMC standards.

6.2 Optimal Installation Practices

Provides guidelines for optimal EMC installation within facilities and control cabinets.

6.2.2 Division Into Areas (Zones)

Distinguishes three areas within a control cabinet based on interference susceptibility.

6.3 Ground Connections and Cable Routing

Explains ground connections and recommendations for routing signal and control cables.

Accessories

7.1 Overview

Provides an overview of available accessories such as contact bars and mounting kits.

Service and Support

Contacting Service and Support

Information on contacting service centers, helpdesks, and preparing for support requests.

Environmental Protection and Disposal

9.1 Environmental Protection

Details the environmental aspects of production processes and product components.

9.2 Disposal

Provides instructions for product return, packaging recycling, and battery disposal.

Related product manuals