Need help?Do you have a question about the Bosch Rexroth IndraDrive HMV01.1E-W0075 and is the answer not in the manual?
General| Type Designation | HMV01.1E-W0075 |
|---|---|
| Series | IndraDrive |
| Output Power | 7.5 kW |
| Protection Class | IP20 |
| Cooling Method | Forced air cooling |
| Input Frequency | 50 Hz to 60 Hz |
| Ambient Temperature | 0...+45 °C (Derating above 45°C) |
| Relative Humidity | 5% to 95% (non-condensing) |
| Power Supply Type | Regenerative Power Supply |
| Input Voltage | 3 x AC 380 V to 480 V |
Defines appropriate use of Rexroth products, emphasizing reading instructions and maintaining original state.
Defines "inappropriate use" and lists conditions under which supply units must not be used.
Emphasizes reading safety instructions before startup and explains hazard seriousness degrees (DANGER, WARNING, CAUTION).
Lists specific hazards like high voltage, dangerous movements, and health hazards from improper use.
Details precautions for preventing electric shock from live parts over 50 Volts and PELV connections.
Discusses causes of dangerous movements and provides measures to prevent them.
Lists ambient and operating conditions for mounting, including temperature, humidity, and contamination levels.
Provides instructions and warnings for mounting cooling units to prevent condensation damage.
Warns about electrostatic discharge damage and provides general installation guidelines.
Introduces interference elimination and EMC considerations, referencing rules for correct installation.
To Next Page